|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
MICROWAVE CORPORATION v00.1101 HMC410MS8G GaAs MMIC DOUBLE-BALANCED HIGH IP3 MIXER, 9.0 - 15.0 GHz Features Conversion Loss: 8.0 dB LO/RF Isolation: 40 dB LO/IF Isolation: 37 dB Input IP3: +24 dBm No External Components MSOP8G SMT Package Typical Applications The HMC410MS8G is ideal for: * Long Haul Radio Platforms * Microwave Radio * VSAT Functional Diagram General Description The HMC410MS8G is a passive double balanced high IP3 mixer that operates between 9 GHz and 15 GHz. The HMC410MS8G operates with LO drive levels between +13 dBm and +19 dBm, and provides 8 dB conversion loss across the entire specified frequency band. This mixer requires no external components or bias. 12 MIXERS - SMT Electrical Specifications, TA = +25 C Parameter Min. Frequency Range, RF & LO Frequency Range, IF Conversion Loss Noise Figure (SSB) LO to RF Isolation LO to IF Isolation RF to IF Isolation IP3 (Input) 1 dB Compression (Input) 30 30 8 20 11 IF = 1.45 GHz LO = +17 dBm Typ. 9.0 - 15.0 DC - 2.5 8 8 40 - 45 37 17 24 14 11 11 Max. GHz GHz dB dB dB dB dB dBm dBm Units * Unless otherwise noted, all measurements performed as downconverter, IF= 1.45 GHz. 12 - 224 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com MICROWAVE CORPORATION v00.1101 HMC410MS8G GaAs MMIC DOUBLE-BALANCED HIGH IP3 MIXER, 9.0 - 15.0 GHz Isolation @ LO = +17 dBm 0 -10 RF/IF LO/RF LO/IF Conversion Gain vs. Temperature @ LO = +17 dBm 0 CONVERSION GAIN (dB) -5 -10 ISOLATION (dB) +25 C -40 C +85 C -20 -30 -40 -50 -60 -15 -20 8 9 10 11 12 13 14 15 16 FREQUENCY (GHz) 8 9 10 11 12 13 14 15 16 FREQUENCY (GHz) 12 MIXERS - SMT Conversion Gain vs. LO Drive 0 Return Loss @ LO = +17 dBm 0 CONVERSION GAIN (dB) -5 RETURN LOSS (dB) -5 -10 -10 -15 RF LO -15 LO = +11 dBm LO = +13 dBm LO = +15 dBm LO = +17 dBm LO = +19 dBm -20 -20 8 9 10 11 12 13 14 15 16 FREQUENCY (GHz) -25 8 9 10 11 12 13 14 15 16 FREQUENCY (GHz) IF Bandwidth @ LO = +17 dBm 0 -5 Upconverter Performance Conversion Gain @ LO = +17 dBm 0 CONVERSION GAIN (dB) 3 -5 RESPONSE (dB) -10 -15 -20 -25 -30 0 0.5 1 1.5 2 2.5 FREQUENCY (GHz) IF CONVERSION GAIN IF RETURN LOSS -10 -15 -20 8 9 10 11 12 13 14 15 16 FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 12 - 225 MICROWAVE CORPORATION v00.1101 HMC410MS8G GaAs MMIC DOUBLE-BALANCED HIGH IP3 MIXER, 9.0 - 15.0 GHz Input IP3 vs. LO Drive* 35 LO = +15 dBm LO = +17 dBm LO = +19 dBm Input IP3 vs. Temperature @ LO = +17 dBm* 35 30 30 IP3 (dBm) 25 IP3 (dBm) 25 20 20 +25 C -40 C +85 C 12 MIXERS - SMT 15 9 10 11 12 13 14 15 FREQUENCY (GHz) 15 9 10 11 12 13 14 15 FREQUENCY (GHz) Input IP2 vs. LO Drive * 70 65 60 LO = +15 dBm LO = +17 dBm LO = +19 dBm Input P1dB vs. Temperature @ LO = +17 dBm 20 19 18 17 +25 C -40 C +85 C P1dB (dBm) IP2 (dBm) 16 15 14 13 12 11 55 50 45 40 9 10 11 12 13 14 15 FREQUENCY (GHz) 10 9 10 11 12 13 14 15 FREQUENCY (GHz) MxN Spurious @ IF Port nLO mRF 0 1 2 3 4 0 XX 15 85 >90 N/A 1 4 0 70 >90 >90 2 28 40 67 >90 >90 3 23 62 78 79 >90 4 N/A 46 83 >90 >90 Harmonics of LO nLO Spur @ RF Port LO Freq. (GHz) 9 10.5 12 13.5 15 16.5 1 34 37 44 47 40 34 2 28 37 45 46 56 47 3 46 50 46 62 58 51 4 60 69 60 N/A N/A N/A RF = 14.45 GHz @ -10 dBm LO = 13 GHz @ +17 dBm All values in dBc relative to the IF power level. Measured as downconverter. LO = +17 dBm All values in dBc below input LO level @ RF port. * Two-tone input power = 0 dBm each tone, 1 MHz spacing. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 12 - 226 MICROWAVE CORPORATION v00.1101 HMC410MS8G GaAs MMIC DOUBLE-BALANCED HIGH IP3 MIXER, 9.0 - 15.0 GHz Absolute Maximum Ratings RF / IF Input LO Drive IF DC Current Storage Temperature Operating Temperature +20 dBm +27 dBm 4 mA -65 to +150 C -40 to +85 C 12 MIXERS - SMT NOTES: 1. PACKAGE BODY MATERIAL: LOW STRESS INJECTION MOLDED PLASTIC SILICA AND SILICON IMPREGNATED. 2. LEADFRAME MATERIAL: COPPER ALLOY 3. LEADFRAME PLATING: Sn/Pb SOLDER 4. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 5. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 6. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 7. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. Outline Drawing For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 12 - 227 v00.1101 MICROWAVE CORPORATION HMC410MS8G GaAs MMIC DOUBLE-BALANCED HIGH IP3 MIXER, 9.0 - 15.0 GHz Pin Descriptions Pin Number 1, 8 Function GND Description Pins and exposed ground slug must connect to RF ground. Interface Schematic 2 LO Por t This pin is DC coupled and matched to 50 ohm from 9.0 - 15.0 GHz 12 3, 4, 6 N/C Not Connected MIXERS - SMT 5 IF Por t This pin is DC coupled. For applications not requiring operation to DC, this por t should be DC blocked externally using a series capacitor whose value has been chosen to pass the necessar y IF frequency range. For operation to DC, this pin must not source/sink more than 4mA of current or die non-function and possible die failure will result. 7 RF Por t This pin is AC coupled and matched to 50 ohm from 9.0 - 15.0 GHz. 12 - 228 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com v00.1101 MICROWAVE CORPORATION HMC410MS8G GaAs MMIC DOUBLE-BALANCED HIGH IP3 MIXER, 9.0 - 15.0 GHz Evaluation PCB 12 MIXERS - SMT List of Material Item J1 - J2 J3 U1 PCB* Description PC Mount SMA RF Connector, SRI PC Mount SMA Connector, Johnson HMC410MS8G 101650 Evaluation Board * Circuit Board Material: Rogers 4350 The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of VIA holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 12 - 229 |
Price & Availability of HMC410MS8G |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |